To get rid of moss, fungus and lichen, use Everbuild Fungicidal Wash, a potent, quick acting treatment for use on most surfaces, including walls, floors and roofs. Everbuild Fungicidal Wash leaves a residual surface to help prevent further infestation.
Everbuild Fungicidal Wash is recommended for use on internal and external walls and floors where mould is prevalent from damp. Use on roofs prior to coating with bituminous coatings to stop mould growth and also to remove algae and moss from drives and patios.
No need to dilute Everbuild Fungicidal Wash, read the label and wear protective clothing. Ensure area to be treated is clear of debris and growth. Apply Everbuild Fungicidal Wash with a brush or spray at a rate of 1 Ltr per 5/10 SqMtrs, depending upon porosity of the surface. Leave solution to penetrate for approximately 20 minutes, then wash down with clean water. Repeat the application if necessary. Do not allow residues to drain directly into fresh watercourses.
Drying time of 1-12 hours is recommended after wash down of the area is completed.
Coverage: 1 Ltr = 5 - 10 SqMtrs
To treat larger areas, please also see Everbuild's Patio Wizard (Moss-Away Concentrate) which dilutes 10:1 and is available in 5 ltrs.
Everbuild 404 Fungicidal Wash Data Sheet
Thank you for registering for our newsletter.
Please provide valid email address