Preparation: Sand the wood in stages with a medium sandpaper (120 grit) to reach a medium / fine grade (180 - 220 grit). Sand in the direction of the grain pattern where possible and ensure the removal of any blemishes and glue residue prior to the application of Fiddes Supreme Wax.
Remove all traces of sanding dust and always test the chosen Fiddes Supreme Wax shade on a discreet area to establish finished result.
Please note: A coat of Fiddes Shellac Sealer is recommended on open grained woods prior to application.
Application: Apply with a clean piece of stockinette or a brush and apply in the direction of the wood grain where possible. To obtain an even colour, always wipe consistently, blending the Fiddes Supreme Wax over the whole surface area with a small degree of pressure when applying by hand.
Lightly remove any excess Supreme Wax immediately with a separate, clean stockinette, again following the direction of the grain pattern. Leave to dry for around 3 minutes at room temperature and buff to finish with a soft cloth.
Applying additional coats will deepen the existing colour or shade and significantly enhance the resulting sheen level.
Recommendation: For use on Furniture, Doors, Skirting, Cabinet Work and Panelling.
Available in: 400ml, 5Ltr and 20Ltr
Coverage: 10-15 SqMtrs/ Litre depending on wood and method of application
Colour charts are intended as a guide only and actual results achieved may vary.
Please note that due to carrier restrictions, the 20 Litre Supreme Wax cannot be delivered on Saturday and orders must be placed before 2pm for same day despatch.