Fiddes Light Fast Water Stains, are easy to use and are manufactured to give a consistent depth of colour for use on all interior wood surfaces.
Fiddes Light Fast Water Stains can be applied by hand or spray, giving a clean and consistent outward appearance.
Sand the wooden surface in varying stages, beginning with a medium grade sandpaper (120 grit) through to a medium/fine grade (180-220 grit). Always ensure sanding is in the direction of the grain pattern and remove any marks and glue residue prior to application of Fiddes Light Fast Water Stains. Make sure all sanding dust is removed and always test Fiddes Light Fast Water Stains on a discreet area to establish finished result.
Stir contents before use and always check the shade before applying.
Use a clean, lint free cotton cloth or sponge and apply Fiddes Light Fast Water Stain in the direction of the wood grain. Ensure any excess stain is immediately removed with a separate cloth. Wipe evenly to obtain an even coverage, using a degree of pressure to blend the stain over the whole area to be treated. Leave to dry, but do not sand between coats.
Additional coats applied will deepen the existing colour.
Application: Cloth, Brush, Sponge or Spray
Drying Time: 1 hour at room temperature
Coverage: 16 sq.m per Litre
Use: Fine Furniture, Doors, Floors, Cabinet work and Panelling
Fiddes Light Fast Water Stains are available in 1 litre containers.
Fiddes Light Fast Water Stains are available in Red Mahogany, Mahogany, Light Oak, Medium Oak, Dark Oak, Teak and Walnut.
Also available in 5 Litre units to order.
Colour charts are intended as a guide only and actual results achieved may vary.
Fiddes Light Fast Water Stain Data Sheet
Thank you for registering for our newsletter.
Please provide valid email address