Mirka Abralon Discs 125mm
They are an exceptional, multifunctional patented sanding material with a hook and eye backing, use Mirka Abralon for flexible sanding of both flat and profiled surfaces.
To reduce the risk of pressure marks, Mirka Abralon creates a smooth sanding pattern on angled
surfaces and edges.
Recommended for use in the automotive, wood finishing and marine industries, the supple weave of Mirka Abralon allows water and air to pass freely, allowing this product suitable for both dry and wet sanding, either by machine or hand.
Mirka Abralon is also recommended for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.
Coarser grits are recommended for surface preparation of composite body parts and fine sanding of the body surfaces before primer and top lacquer applications.
Finer grits are suitable for smoothing of primers and bottom lacquers and the preparation of surfaces between blending. The sanding of pock marked surfaces and the preparation of the top coat prior to polishing.
|Backing:||Knitted fabric on foam|
|Coating:||Special ABRALON method|
|125mm Grit Range:||P180, P360 and P600 - stocked|
Pack Sizes: 20
Mirka has been a leading manufacturer and supplier of abrasives to the wood and furniture industry for over three decades, as well as the marine and automotive industries. Specialising in coated, non- woven, dust-free sanding products for surface finishing.
Thank you for registering for our newsletter.
Please provide valid email address