Mirka Abralon Discs 150mm - Box 20
150mm Abralon Discs are an exceptional, multifunctional patented sanding material with a hook and eye backing, it can be used for sanding flat and profiled surfaces.
To reduce the risk of pressure marks, Mirka Abralon creates a smooth sanding pattern on angled surfaces and edges.
Recommended for use in the automotive, wood finishing and marine industries, the supple weave of Mirka Abralon allows water and air to pass freely, allowing this product suitable for both dry and wet sanding, either by machine or hand.
Mirka Abralon is also recommended for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.
Coarser grits are recommended for surface preparation of composite body parts and fine sanding of the body surfaces before primer and top lacquer applications.
Finer grits are suitable for smoothing of primers and bottom lacquers and the preparation of surfaces between blending. The sanding of pot marked surfaces and the preparation of the top coat prior to polishing.
|Backing:||Knitted fabric on foam|
|Coating:||Special ABRALON method|
|Grit Range:||P500, 600, 1000, 2000, 3000, and 4000 are kept in stock|
Available in: 77mm and 150mm Discs
Pack Sizes: 20 or trial size of 2
Mirka has been a leading manufacturer and supplier of abrasives to the wood and furniture industry for over three decades, as well as the marine and automotive industries. Specialising in coated, non-woven, dust-free sanding products for surface finishing.
The VIDEO above shows 'Polish your boat with Abralon', an example process using Abralon which can be applied in the marine, automotive and wood finishing and polishing industries.
Thank you for registering for our newsletter.
Please provide valid email address