Mylands High Solid Waterbased Self-Crosslinking Lacquer
(HS SCL Lacquer) can be used as a coat-on-coat system or over Mylands HS SCL Sealer and dries to a long lasting finish with excellent transparency, flow and surface feel!
Mylands HS SCL Lacquers are designed to meet the FIRA 6250 Heavy/Severe Use Standard.
Mylands HS SCL Waterbased Self-Crosslinking Lacquer is a premium waterbased lacquer on par with many standard Acid Catalyst and Pre Catalyst Lacquers.
Standard products are for application by Conventional, HVLP or Air assisted Airless spray methods. Normally, two or more coats of the same material are applied, the exception being the full matt lacquer where we recommend a basecoat of a higher sheen material is used to maintain clarity of finish.
Touch dry in 15-20 minutes
Sanding/re-coating between 60 - 90 minutes.
These times may be reduced by forced drying. At temperatures below 15°C and high humidity, drying times will be extended and film formation endangered.
6 - 8 Square Mitre per 1 litre.
Mylands Water Based HS SCL Lacquer Data Sheet
Thank you for registering for our newsletter.
Please provide valid email address