Rustins Plastic Coating is a first-rate, two-part clear cold cure lacquer recommended for use on wood, cork, hardboard and plastic laminates. Rustins Plastic Coating has excellent good adhesion, resistant to solvents, heat and abrasion.
Rustins Plastic Coating gives an excellent finish for those who have a hobby of marquetry, as it will not darken light coloured veneers and is guaranteed not to yellow or craze with age.
Can be burnished to a mirror like gloss or rubbed down to a smooth, satin finish with steel wool and wax.
Available in: 250ml Oufit, 1 litre (Inc 250ml Hardener) or 4 litre (Inc 1 litre Hardener)
250ml Outfit contains: * 250ml Clear Plastic Coating * 63ml Hardener * 135ml Thinners * Burnishing Cream and Full Instructions
Rustins Plastic Coating Thinners: Rustins Plastic Coating Thinners are designed to be used with Rustins Plastic Coating, Plastic Coating Floor Lacquer, and brush cleaning when using these products. Directions: Mix the Plastic Coating and Hardener together before adding the thinners. Cleaning: Remove as much as possible of the plastic coating from the brush or roller before cleaning with the solvent/Plastic Coating thinners, then wash out with soapy wate. Available in: 500ml
Rustins Plastic Coating Product Information Sheet
Rustins Plastic Coating Safety Data Sheet
Thank you for registering for our newsletter.
Please provide valid email address